IP 100

5.25-inch Disk-Size ETX Base Board
IP100 is used in conjunction with 100mm x 114mm
ETX CPU modules such as the ET815 Celeron/Pentium III ETX CPU module.



    (Click to zoom)

IP100 Features
Ethernet Function
• Two Intel® 82559 Single Chip Ethernet controllers
• Pin headers for three RJ-45 connectors (one RJ-45 is for the built-in LAN on the ETX CPU module)
VGA Connector
• Pin header for VGA CRT connector
LCD Panel Connector
• LVDS interface (Hirose DF13) connector
IDE Interface
• One enhanced IDE interface supports 2 IDE devices in UDMA/33/66/100, PIO mode 4 and bus master mode
• Two 44-pin header connectors
FDD Interface
• Pin header supports up to two floppy disk drives: 3.5"(720KB, 1.44MB or 2.88MB) and/or 5.25"(360KB or 1.2MB); with 3 Mode support
Serial Ports
• Pin headers for two RS-232 ports (COM1 & COM2)
Parallel Port
• One parallel port supports SPP/EPP/ECP
USB
• Pin header for four (4) USB ports
IrDA
• Pin header for infrared module


DiskOnChip Interface

• DiskOnChip socket supports 2MB~144MB DiskOnChip flash disks
Mouse Connector
• Pin header for PS/2 connector
Keyboard Connector
• Pin header for PS/2 connector
• 5-pin header for external keyboard connector
Fan Power Connector
• System fan power connector
• CPU fan power connector
Other Connectors
• TV out connector
• IrDA connector
• Backlight control
• System Function connector
• Main Power connector
• Audio connector
• CD-In connector
• ATX Power Control connector
On board Jumpers
• DiskOnChip Address Select
• COM2 RS232/422/485 Select
• Onboard LAN1 Select
• Onboard LAN2 Select
• LCD Power Setting
Expansion Slots
• One 32-bit PCI slot
• One PC/104 connector
Form Factor
• 5.25-inch Disk-Size form factor
Dimensions
• 203mm x 146mm
Environmental Factors:
  Operating Temperature
  • 0C~60C (32F~140F)
  Storage Temperature
  • -20C~80C (-68F~176F)
  Relative Humidity
  • 10%~90% (non-condensing)
  Ordering Information:
  IP100 - 5.25-inch Disk-Size ETX Base   Board

Ordering Information:
IP100 - 5.25" baseboard for ETX, w/ 82559 LANx2, USBx4, w/o RJ45x2 (IBLD), cable kit (IB10)
IP100L - 5.25" baseboard for ETX, w/ 82559 LANx1, USBx4, w/o RJ45x1 (IBD), cable kit (IB10)
IP100P - 5.25" baseboard for ETX, USBx4, w/o cable kit (IB10)
IB10 - IDEx2, COMx2, VGA, Audio, RJ45, USBx2